PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Description Unleash Your Potential!The Leidos Innovations Center currently has an opening for a Principal Radio Frequency (RF) Engineer to work in our San Diego, CA office. This is an exciting opportunity to develop disruptive RF technologies that could be integrated into future DoD systems.If this sounds like an environment where you can thrive, keep reading!As a Principal RF Engineer, you will directly support a rapidly growing sector within the Division by designing, developing, and demonstrating new RF technologies that could enable enhanced performance in compact form factors that enable fundamentally new Defense capabilities.Your greatest work is ahead!Your responsibilities would initially be working with current RF engineers to understand performance trades, investigation into new material approaches such as reconfigurable RF metamaterials, and building new insights and capabilities in integration of such technologies into future systems. Additional responsibilities may include serving as a Principal Investigator (PI) on Contract R&D efforts with the Government, working on novel concepts through internal R&D (IRAD) effort, and may include the opportunity to serve as a supervisor.This position can be based out of San Diego, CA or Arlington, VA. Occasional telework opportunities may be available.Primary ResponsibilitiesLeverage expertise in RF metamaterials to analyze trades in performance and size, weight, and power for disruptive RF payloadsUtilize modeling tools to project performance vs power consumption trades for disruptive RF systemsCollaborate with RF engineers to evaluate and mature RF technologies, and develop a pipeline to transition them to production and integration into deployable systemsContribute to developing a roadmap of novel RF technologies for future systems, and explore nascent conceptsBasic QualificationsBachelors in engineering, physics, optics, or equivalent field with 12+ years of prior relevant experience or Master’s degree in engineering, physics, optics, or equivalent field with 10+ years of prior relevant experience or Doctorate in technical domain above with 8+ years of prior relevant experience.Must have be a U.S. citizenMust have the ability to obtain and maintain a Secret security clearance.Proficient in applied computational electromagnetics and antenna systemsExpertise in RF device design using finite element-based design tools such as COMSOL, CST, or LumericalStrong understanding of material electrical and mechanical propertiesExpertise in nascent RF device concepts such as metamaterials and time-varying systemsProficient in WindowsExcellent communication skills and proven ability to work directly with customers and deliver resultsMission oriented with a strong ability to guide a team towards goals and deliver real world productsProficient with technical writing, documentation, and organizationRobust sense of initiative, a self-starter who can work independentlyPreferred QualificationsMaster's degree or Doctorate in engineering, physics, optics, or equivalent field is preferred.Active Secret security clearance with the ability to obtain a Top Secret clearanceExperience in designing and testing electrically-small antenna systemsExperience in building and validating RF device concepts in experimental prototypesExperience with integrated circuit layout, printed circuit board (PCB design), National Instruments SW such as LabVIEW, Multisim, PXIProgramming experience, C/C++, Visual Basic. Aptitude and desire to perform programming for the purpose of data manipulation and processingExperience in proposal development and business development4LInCOriginal Posting Date:2024-09-12While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $122,200.00 - $220,900.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Build your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ HVAC products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree in a technical field (engineering, construction management, IT etc.) and graduating in December 2024 and May/June 2025. Program starts January 6, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Description Are you innovative, versatile, and resourceful Do you enjoy the rush of working on concept design, analysis, detailed design, prototype development, lab testing, and field testing If so we are looking for you, our next Electrical Engineer to work in San Diego, CA, as part of a small multi-discipline team to develop quick-turn, thoroughly analyzed, mission critical solutions that will improve end user capabilities.Be an integral part of an energetic, highly-engaged small team where there are many overlapping roles and opportunities for cross-over skillsets to develop and contribute across a range of technologies. We know you’ll take great satisfaction in applying theory and technical creativity to rapidly develop impactful solutions for national defense air, maritime, and/or terrestrial platforms.Primary Responsibilities- Design, analyze, develop, and test electronics, sensors, actuators, measurement systems, and controls in support of advanced Survivability systems- Provide direct engineering support for customers and end-usersBasic Qualifications- Bachelor's Degree in Science or Engineering with 8+ years of relevant experience or Masters with 6+ years of experience.- Must have a Secret Security Clearance with the ability to obtain a Top Secret Security Clearance- Excellent computer skills, with experience using LINUX/UNIX, Windows- Experience with integrated circuit layout, printed circuit board (PCB design), National Instruments SW such as LabVIEW, Multisim, PXI- Experience with embedded software development (Firmware development for MCUs)- Excellent oral and written communication skills- Ability to work independently as well as with a team- Excellent problem-solving skills- Must be meticulous, organized, responsible, and self-motivated with a can-do attitude- Must be a U.S Citizen- Some travel within the US is requiredPreferred Qualifications- Background in Electrical Engineering, Physics, and/or Mathematics. Advanced degree is a plus- Programming experience, C/C++, Visual Basic. Aptitude and desire to perform programming for the purpose of data manipulation and processing- Working aptitude for surfacing, manipulation, and meshing of CAD geometries for use in analytical codes- Proficient with basic hand and shop tools for the purpose of test article preparation and/or prototype development- Experience with MS OfficeLInCOriginal Posting Date:2024-07-26While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $101,400.00 - $183,300.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

BEST - FireBuild your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base, plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ Fire products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree and graduating in December 2024 and May/June 2025 Program starts January 13, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Description The EW Division of Leidos is looking for a Microelectronics Design Engineer to work with a multi-disciplined design team (electrical engineers, systems engineers, scientists, etc) to design, develop, simulate, and integrate innovative custom microelectronics in support of warfighter missions. Candidate will have a strong background in Digital Signal Processing (DSP) algorithms and their implementation in MATLAB and FPGAs in support of a fast paced, multi-disciplinary design team. This role will also support integration, test, and verification in the final products.Primary Responsibilities:The successful candidate will support technical and programmatic assessments of technologies, capabilities, materials, equipment, and performers in support of the advancement of the U.S. Defense Industrial Base’s (DIB) access to trusted, state-of-the-art microelectronics.This position will interface and collaborate with a range of engineers, scientists, policy makers, and executives within the government, industry and academia across the country..Provide occasional technical support and/or field support planning, and other field support in general if needed.Conduct experimental tests on latest SoC evaluation boards, evaluate results, and then develop specifications for selecting next-generation components for deliverable systems.Interact with outside customers, suppliers, and functional peer groups.Some travel and work at remote sites for limited time periods may be occasionally required.Provide status reports to project managers and/or division production manager as required.Basic Qualifications:U.S. Citizenship with the ability to obtain a TS clearance.BS and 8 years required. Masters Degree in Electrical Engineering, Computer Engineering, Computer Science or related technical discipline desired with 6+ years of experienceExperience with DSP fundamentals and FPGA implementationExperience with Matlab/SimulinkExperience with microchip EDA tools and flows (Synopsys, Cadence, etc.)Microelectronics hardware subject matter expertise in at least (1) of the areas listed below AND experience in (1) additional area listed below:Microelectronics Supply Chain: microelectronics hardware verification/security/trust/assurance, vendor selection/qualification/audit, procurement (i.e. domestic foundry interaction)Wafer-Level Design: digital, RF and/or mixed signal circuit design (schematic, layout), modeling & simulation of key circuit parameters (power, speed, timing, signal integrity, thermal, reliability, etc.)Chip-Scale Design: digital, RF and/or mixed signal device packaging design/layout (2D-3D, chiplet/UCIe), substrate/interposer design (HDI, HDBU, EMIB), chip attach (epoxy, solder), chip interconnect (chiplet, flipchip, wire/ribbon bonding), modeling & simulation (power, speed, timing, signal integrity, thermal, structural, reliability)Hardware Programming: FPGA (i.e. Verilog, VHDL), Programming (Linux command line/scripting, Python, Java, and C++)Preferred Qualifications:8+ years experience in leading a design teamExperience in hardware test and measurement and hands-on lab debugExperience with interfaces: ADC/DACs, SerDes, PCIe, JTAG, DDRxLInCElectronic WarfareOriginal Posting Date:2024-04-29While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $101,400.00 - $183,300.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Dynetics, is seeking a talented Project Engineer to support Defense and Civil Space Systems in the Space Division. With offices across the United States engaging in the defense, space, cyber and commercial fields, Leidos Dynetics provides responsive, cost-effective engineering, scientific and IT solutions.As a core member of the team, you will play a valuable part in supporting and executing IR payload capabilities for a variety of customers. You will be required to support multiple tasks in parallel, productively contribute to and lead team environments, and communicate effectively to management, coworkers, and customers. You must also be self-motivated and highly organized with a focus on managing customer expectations with a constant goal of generating high quality products that exceed stakeholder expectations. In this role you will also serve as the control account manager (CAM) across multiple integrated product teams (IPTs).Primary Responsibilities:The IR Payloads Project Engineer will have a key impact on program execution and will:• Directly support program management office in successful execution of allaspects of the program(s) including cost, schedule, procurement, integration, resource management• Establish and maintain Control Account budgets and schedules• Support forecasting completion costs for responsible cost accounts• Define the tasks and the sequencing of the schedule for optimizing theaccomplishment of the work scope• Work with technical leads to define and evaluate resources and schedulerequired to complete defined work• Assure the scheduled activities for the Control Account have a realisticduration and performance logic• Proactively manage the personnel performing the Control Account detailedscope of work•Review and approve all resources and cost type charging to the ControlAccount and assure its accuracy•Prepare Control Account Variance Analysis Reports that clearly addresscause, impact, and corrective action•Prepare Estimates to Completion for remaining Control Account and workpackage work scope•Provide forecast dates for accomplishing activities and milestones in theControl Account Schedule•Lead or participate in Make/Buy decisions• Status all work scheduled within the Control Account•Participate in applicable IPT meetings to assure technical integration•Preparation and/or review of variances, exceptions and/or waivers torequirements• Work in a team environment, oversee team status on progress and issues,and elevate as needed for supportBasic Qualifications:• BS degree in Engineering from an accredited engineering school and aminimum of four (4) years of direct engineering experience, or a MS degreefrom an accredited engineering school and two (2) years of directengineering experience• Minimum of one (1) year of experience with hardware and/or operations indirect engineering experience• Demonstrated strong verbal and written communication skills, be able towork in a team, and develop cooperative relationships• Ability to track multiple tasks and prioritize work independently•Self-motivation and quick learner to adapt to the broad array of subjects andissues encountered• Experience with supply chain management and ability to work with suppliersto help them meet both hardware and non-hardware deliverablerequirements• Candidate must be a resident of the North Alabama area or be willing torelocateMust be a US citizen and able to obtain and maintain a DoD clearance.Preferred Qualifications:• A working knowledge and experience with space rated IR payloads• Project Engineering experience/background or a desire to learn project engineering• Exposure or general knowledge of Earned Value Management• MS Project experienceOriginal Posting Date:2024-08-14While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Looking for a rewarding career challenge Unleash your potentialat Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. With Leidos, you will enjoy competitive benefits such as Paid Time Off, Flexible Schedules, Discounted Stock Purchase Plans, Education and Training Support, Parental Paid Leave, and more!If this sounds like an environment where you can thrive, keep reading!Are you ready to join an incredible team This contract is critical to the government and allows team members to work independently and in a team environment to achieve success. If you are passionate, motivated, and want to be part of an organization that values your contributions, we want to hear from you. Apply today!Your greatest work is ahead!The Leidos National Security Sector has an exciting opening for an experienced, and cleared at the TS/SCI Polygraph level, Database Engineer/Oracle Database Administrator is needed to join a high performing agile team using the Scaled Agile Framework (SAFe) methodology in support of a large, fast-paced program using Behavior Driven Development (BDD) and test automation tools alongside a full suite of team collaboration tools. Program execution follows DEVOPS best practices and employs robust development, test and production environments. The program provides system engineering, development, test, integration, and operational support to a large, complex, technical program, and is infusing new technology and adding advanced capabilities while continuing to support an on-going mission and operational system.You will support a complex system with exacting interface, performance, and security requirements, and will provide database engineering expertise in one or more of the following areas: architecture, design, development, requirements analysis, data flow, network design/implementation, testing, and documentation. She/he will analyze user requirements and system requirements specifications and will develop system architecture and system design documentation; support the development of system configuration documentation, including designs for capacity and performance planning; perform database engineering activities to include risk assessments and analyses of alternatives for a variety of system related issues and concerns; provide solutions to challenging technical problems in distributed data replication, concurrent data access, and high availability.Primary ResponsibilitiesYou will provide guidance and support for database engineering of large-scale systems, major system elements, and interfacing systems that are part of a large complex network environment with geographically distributed components; interface with technical managers, system and software integration engineers, test engineers, information assurance engineers, and other project team members in an Agile environment; be responsible for implementing database engineering practices to ensure the proper degree of engineering rigor is applied to all assigned tasks; communicate effectively and collaborate with internal technical professionals on a day-to-day basis, and with POCs from customer organizations when necessary. You will actively participate in Program Increment Planning and related Agile team activities. Assigned duties may include:Supporting database design, development, implementation, information storage and retrieval, data flow, and analysis activities.Supporting the analysis and evaluation of system improvements, optimization, development, and/or maintenance efforts.Supporting the development of long-term and short-term requirements for database administration and design.Assisting in developing databases, database parser software, and database loading software.Translating requirements and data into usable database schemas by creating or recreating ad hoc queries, scripts and macros, making updates to existing queries, and creating new queries to manipulate data into a master file.Assisting in the development of database structures that fit into the overall architecture of the system under development.Developing requirement recommendations from a project’s inception to its conclusion for a particular Business and IT subject matter area (i.e. simple to complex systems).Developing database structures that fit into the overall architecture of the system under development.If not located at the MD location, some short-duration travel may be required to support quarterly PI Planning sessions in MD.Basic QualificationsBachelor's Degree in a technical discipline and at least 8 years of related experience. Additional experience may be substituted for a Bachelor’s Degree.Must have a current TS/SCI Polygraph clearance up frontMust have experience as a Database Administrator to include proficiency in tasks such as data migration, data replication, user administration, backup and recovery, performance tuning, issue investigation, issue resolution, and general administration.Must have a good understanding of databases, primarily Oracle and/or other relational and non-relational/NoSQL databases such as PostgreSQL and MongoDB.Must have experience using Oracle SQL/PLSQL, and SQL in general.Must have experience scripting with JavaScript, Bash/Linux shell scripting (in general), Perl, and/or Python.Must have knowledge of programming languages to include Java.Must be committed to adopting and adhering to best practices.Must be able to effectively plan and prioritize tasking.Must be capable of performing high quality work both independently, and with a team, in a fast-moving environment.Preferred QualificationsExperience with the Scaled Agile Framework (SAFe) methodology and/or as a member of an Agile team.Experience with Cassandra.Experience with MongoDB.Original Posting Date:2024-08-21While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $101,400.00 - $183,300.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Remote Licensed Clinical Psychologist Wage: Between $95-$166 an hour Are you a Licensed Clinical Psychologist looking to launch a private practice, or grow your existing practice Headway can help you earn more through insurance! Headway supports thousands of mental health clinicians across the United States in our mission to rewire the mental healthcare system for access and affordability. We equip mental health practitioners with the tools and resources they need to run a flourishing private practice. Mental health clinicians use Headway in a number of ways, ranging from conducting psychotherapy sessions with patients to providing and overseeing medication management. Whether you're new to private practice or already have an established practice of your own, we’re excited to support you in reaching your goals!By joining the Headway community, we’ll help you: Accept insurance hassle-free by credentialing you with the nation’s largest networks and handling the billing and admin paperwork for you.Maintain a flexible schedule by deciding how many clients you see through Headway, so that you can set the hours that work for you.Grow your caseload by providing marketing support and patient referrals. We’ll also support your patients by Providing customized support to clinicians and patients in order to streamline the process of both seeking and providing care.Verifying client insurance benefits instantly and automatically, so that access to care is never delayed, and you can see your patients with confidence. And we do this completely free of charge to you! Headways is a flexible service, meaning your hours are yours to set, and it’s up to you whether you see your patients in-person or remotely via telehealth while working from home.We accept the following licenses on a state by state basis: PSYPSYPPsyD Ready to get started We are excited to begin helping you if you are a fully-licensed Clinical Psychologist at a Master’s level or above with: A valid NPI numberMalpractice insurance Please note, at this time, we are unable to service mental health professionals that are not fully licensed. Your application will be rejected until you obtain a valid license. Not sure if you’re qualified to work with us Send in your application and our team will do our best to help.